Back to Blog

    Tap takeover for craft beer drinkers: checklist and expectations

    Craft beer takeover at a taproom

    A tap takeover is when a venue hands over some or all of its beer taps to a single brewery for a set period, usually one night to a full weekend. It turns an ordinary bar into a temporary showcase for one producer’s range, giving drinkers a rare chance to try several beers from the same brewer side by side. Breweries get direct exposure to new drinkers, and venues get a reason for regulars to turn up on a quiet weeknight.


    TL;DR:

    • Most tap takeovers last from one night to a full weekend, with single-venue events focusing on one brewery and town-wide festivals involving multiple venues.
    • Breweries supply the beer, while venues handle the lines, cellar prep, and staff training, with cask and keg setups requiring different handling and cleaning schedules.
    • Takeovers are low-cost ways for breweries to showcase their range directly to consumers and for venues to boost foot traffic without changing their regular taplist.
    • Attendees can expect smaller serves, guided tastings, and supplementary merchandise or food, with most events happening during normal hours and without requiring tickets.
    • Organizers should ensure proper line hygiene and staff briefings to maintain quality and comply with licensing conditions, often using existing venue licenses for legal coverage.

    Lost And Found Taproom
    Explore Brighton’s Independent Beer Scene
    Discover rotating local brews, UK beers and welcoming events at Lost+Found Taproom in Brighton’s Fiveways community.

    Table of Contents

    What a tap takeover looks like: formats and examples

    Most takeovers fall into two camps. The simplest is a single venue giving one brewery several lines, sometimes every tap in the place, for an evening or a weekend. The other is a coordinated, town-wide event where multiple pubs and bars each host a different brewery on the same dates, turning an entire high street into a mini beer festival.

    Durations and rules vary by organiser. A CAMRA press release on boosting pub trade notes that takeovers typically run from a single night to a full weekend, and some town-wide events set independence criteria for participating breweries.

    • Single-venue takeovers: one brewery, one bar, usually an evening or a weekend.
    • Town-wide takeovers: several venues each hosting a different brewery on the same dates.
    • Independence rules: some festivals require venues to pour a minimum share of independent beer to qualify, which keeps the event focused on smaller producers.

    Venues usually advertise participation on their own taplists and social channels rather than through formal tickets.

    How a takeover works in practice

    Behind the scenes, a takeover is a logistics exercise as much as a marketing one. The brewery typically supplies the kegs or casks, while the venue provides the lines, cellar space and staff. Sales risk sits with whoever owns the stock: some breweries sell on consignment, others sell the beer to the venue outright before the event starts.

    1. The venue and brewery agree dates, volumes and which lines will be freed up.
    2. Existing kegs or casks are cleared and lines are cleaned before the new stock goes on.
    3. Couplers, handpulls or keg badges are swapped to match the incoming beers.
    4. Branded glassware, point-of-sale materials and tasting notes arrive with the delivery.
    5. Staff are briefed on the beers, styles and any guided tastings planned for the night.

    Cask and keg swaps are handled differently. Cask ale is unpressurised and served by gravity or handpull, while keg beer is pressurised and dispensed through a coupler using CO2 or mixed gas, as explained in Pinter’s guide to draught beer. That distinction affects how quickly a venue can turn lines over between sessions.

    Pro Tip: Ask the bar staff which lines are part of the takeover before you order. Not every tap is always given over, and knowing which ones are can save you a wasted pint.

    Staff member explaining takeover tap lines

    Why breweries and venues run takeovers

    For an independent brewery, a takeover is a low-cost way to put a full range in front of drinkers who might never see it on a supermarket shelf. For a venue, it is a way to create a destination night without permanently changing its taplist.

    • Breweries gain direct feedback and word-of-mouth from a captive, curious audience.
    • Venues use takeovers to draw footfall on nights that would otherwise be quiet.
    • Rotating a different brewery through the same slot keeps regulars coming back to see what is new.

    The Oakwell blog on tap takeovers frames these events as much about education as sales, with brewery staff often on hand to talk drinkers through unfamiliar styles.

    What attendees should expect

    Turning up to a takeover is usually no different from turning up to the pub, just with a more interesting taplist. Most run during a venue’s normal opening hours and don’t require a ticket, though larger festival-style events sometimes list their own pages with extra details worth checking in advance.

    • Beers are often served in smaller measures, such as thirds or halves, so you can try more than one.
    • Some nights include guided tastings led by brewery staff, with short notes on each beer’s style and strength.
    • Merchandise, raffles and branded glassware are common, and food is sometimes arranged separately through a street food vendor or the venue’s own kitchen.

    Real event write-ups, such as one covering a tavern takeover reported by London Drinker, show the format ranging from three guest ales at a small pub to six lines at a larger venue, often paired with raffles and merchandise stalls.

    Licensing and venue responsibilities

    A tap takeover doesn’t usually need its own licence because it happens inside a venue that already holds one. Alcohol sales still have to be authorised by a personal licence holder and comply with the mandatory conditions set out in the Licensing Act 2003, including age verification and standard measure sizes.

    • The venue’s existing premises licence covers the event, so a temporary event notice is rarely needed.
    • Staff must still check age and serve within the licence’s permitted hours.
    • Organisers should confirm with the venue that the event fits within existing licence conditions before promoting it, particularly for larger or multi-venue events.

    Technical checklist for organisers and hosts

    Running a good takeover comes down to the same fundamentals as running a good bar, just under more pressure on the night. Getting the dispense right matters more than the marketing.

    1. Clean beer lines before the event starts, and again if the takeover runs longer than a week, since trade guidance on beer dispense line hygiene recommends cleaning dispense systems at least once every seven days.
    2. Soak dispense nozzles after each session to stop biofilm building up between pours.
    3. Keep cellar temperature consistent, since cask and keg beers condition differently and both suffer if the cellar runs warm.
    4. Check couplers, handpulls and gas settings match the incoming beer style before the first pour.
    5. Brief staff on tasting notes and strengths so they can talk drinkers through the range confidently.

    Pro Tip: Cask ale has a short window once it’s tapped, often only a couple of days at its best, so plan pour rates to match expected footfall rather than opening every cask at once.

    Why Lost And Found values tap takeovers

    Why Lost And Found values tap takeovers — overview diagram

    Hosting a takeover forces us to think harder about curation than a normal week does. Handing several lines to one brewery for a weekend means picking a range that tells a proper story about that brewer’s work, not just whatever is available.

    Regulars get to try beers they’d otherwise have to travel for, and the visiting brewery gets a room full of people who actually want to talk about beer. The taplist and food menu are often available online for those interested in seeing what’s pouring before visiting.

    — Author

    Hosting your own event at Lost And Found

    If reading this has you thinking about running a takeover-style night of your own, our venue hire covers exactly that kind of evening. Midweek Hire and Weekend Hire are both available, with full details on our venue hire page.

    Lost And Found Taproom

    • Exclusive use of the space, with details on costs available through the venue’s website, so your budget goes primarily on drinks and food rather than the room.
    • Full flexibility on decorations, music and which breweries or drinks you want poured.
    • The venue focuses on serving beers and ciders from independent breweries, supporting local producers, which suits anyone planning a genuinely local event.

    Check our current beer and cider selection to get a feel for what could be on your taps, or browse our full beer menu before you enquire. Get in touch to talk through dates, and if you’re planning something larger, a platform like TixRocket can handle ticketing for bigger, multi-venue takeovers.

    Sources

    FAQ

    What is the purpose of a tap takeover?

    A tap takeover exists to showcase a single brewery’s range in one place, giving drinkers a concentrated taste of what that brewer does. It also gives the brewery direct exposure to new customers and gives the venue a reason to draw people in on an otherwise ordinary night.

    Why do people call it a taproom rather than a tap room?

    Both spellings are used, but “taproom” refers to a venue built around serving beer directly from the tap, often alongside the brewery itself. It’s a slightly different concept from a tap takeover, which is a temporary event that can happen in any pub, bar or taproom.

    Is tap the same as draught beer?

    Yes, “tap” and “draught” are generally used interchangeably to describe beer served from a pressurised or gravity-fed system rather than a bottle or can, according to Pinter’s explanation of draught beer. Cask ale is served by gravity or handpull, while keg beer is dispensed using gas pressure through a coupler.

    How does beer on tap actually work?

    Beer on tap is stored in a keg or cask connected through lines to a tap at the bar, with keg beer pushed through using gas and cask ale served by gravity or handpull. Keeping those lines clean matters: trade guidance on dispense hygiene recommends cleaning systems at least once every seven days to protect flavour.

    Do I need a ticket to attend a tap takeover?

    Most tap takeovers run during a venue’s normal opening hours and don’t require a ticket, though some larger festival-style events list extra details on their own event pages. Venues still need to operate within their existing premises licence under the Licensing Act 2003, including standard age checks.

    Back to Blog