Three Menu Numbers: Craft Beer Terms for UK Taprooms

Three numbers tell you most of what you need to know on any craft beer menu: ABV (strength), IBU (bitterness) and colour, usually shown as EBC. Beyond those, a handful of ingredient, process and cask words explain almost everything else you will see written on a pump clip or tap list. UK labelling rules affect how ABV gets displayed, and a friendly taproom is the easiest place to put all of it into practice.
TL;DR:
- Beers with higher ABV over 1.2% are required to show their alcohol content on the label, often with decimal precision.
- IBU measures hop bitterness, but sweetness, carbonation, and temperature can mask or amplify perceived bitterness.
- UK beer colour is usually given in EBC, which is roughly double the SRM scale based on measurement differences.
- Malts, hops, yeast, and water each contribute specific flavors and textures, with process terms like dry-hopping enhancing aroma without increasing bitterness.
- Style labels like imperial, session, hazy, or bottle-conditioned provide reliable clues about strength, mouthfeel, and brewing techniques.
Table of Contents
- Quick numbers: ABV, IBU and colour explained
- Ingredients and brewing process terms worth knowing
- Common beer styles and what each one promises
- Tasting vocabulary: how to talk about what you drink
- Containers and dispense: bottles, cans, kegs and casks
- Slang, naming and label cues worth spotting
- Reading a real menu at Lost And Found
- Why a little vocabulary changes how you enjoy beer
- Visit us or browse the beer menu online
- FAQ
- Sources
Quick numbers: ABV, IBU and colour explained
ABV stands for alcohol by volume, the percentage of the drink that is pure alcohol. A 4% ABV beer is weaker than a 7% one, and most craft beers sit somewhere between 3.5% and 9%, with imperial styles climbing higher still. In the UK, any drink over 1.2% ABV must show its strength on the label, and for duty purposes alcohol content is recorded to one decimal place, which is why you will often see figures like 4.1% or 5.6% rather than round numbers, as set out in alcohol duty guidance.
IBU, or International Bitterness Units, measures the concentration of iso-alpha acids that come from hops. One IBU corresponds approximately to 1 milligram of iso-alpha acids per litre, and typical ranges run from 5 to 10 IBU for a light lager up to 55 to 70 IBU for a classic IPA, with double IPAs and barley wines sometimes reaching 65 to 100, according to the Beer & Brewing dictionary on bitterness. The number only tells half the story, though. A 60 IBU beer with a big malt backbone can taste far gentler than the figure suggests, because sweetness, carbonation and serving temperature all mask or sharpen bitter perception.

Colour works the same way: it hints at flavour before you have taken a sip. In the UK and Europe, colour is usually given in EBC (European Brewing Convention units) rather than the American SRM scale, and the two are not directly interchangeable because they use different measurement methods, as explained in research on beer colour measurement. EBC uses a wider light path and a higher multiplier than SRM, so an EBC figure is roughly double the equivalent SRM number for the same beer.
As a rough guide when scanning a menu:
- Pale, straw-coloured beers (low EBC) tend to be crisp, light and lager-like.
- Amber and copper beers (mid-range EBC) usually carry caramel or biscuit malt notes.
- Dark brown to black beers (high EBC) point to roasted, coffee or chocolate character, as in stouts and porters.
If you want a sessionable option while you get your bearings, our guide to low ABV beer covers what to expect at the lighter end of the scale.
Ingredients and brewing process terms worth knowing
Four ingredients make beer: malt, hops, yeast and water. Each does a specific job, and knowing what they contribute makes tasting notes click into place instead of sounding like guesswork.
Malt is sprouted, dried grain, usually barley, and it supplies the sugars that yeast turns into alcohol. It also shapes body and colour: pale malts give a light, biscuity backbone, while darker roasted malts bring toffee, toast or espresso notes and push the colour toward brown and black. Hops contribute two things: bitterness, when added early in the boil, and aroma, when added late in the boil or after fermentation in a process called dry-hopping. A heavily dry-hopped IPA can smell like citrus, pine resin or tropical fruit without necessarily tasting more bitter, because aroma and bitterness come from different stages of the brewing process.
Yeast decides whether a beer is an ale or a lager. Ale yeast ferments warm and fast, producing fruity esters and a rounder character. Lager yeast ferments cold and slow, giving a cleaner, crisper result. Water matters more than most drinkers assume: its mineral content changes how hops and malt come across, a concept brewers call Burtonisation, named after the naturally sulphate-rich water of Burton-upon-Trent that made the town famous for pale ale.
A few process words complete the picture:
- Wort is the sugary liquid extracted from malt before fermentation begins.
- Mash is the stage where crushed malt steeps in hot water to release those sugars.
- Boil is when hops are added and the wort is sterilised.
- Fermentation is where yeast converts sugar into alcohol and carbon dioxide.
- Conditioning is the resting period after fermentation that smooths flavours and builds carbonation.
Pro Tip: Next time you read a can label mentioning “dry-hopped”, expect a bigger hop aroma without a matching jump in bitterness.
Common beer styles and what each one promises
Style names are shorthand for a bundle of expectations around strength, bitterness and mouthfeel. Once you know a handful of core families, most menus stop looking like a foreign language. Style guides such as those from CAMRA and the Beer Judge Certification Program are useful references, though they function as evolving frameworks rather than fixed rules, so a beer that bends a category is not necessarily a mistake.
- Pale ale and IPA: hop-forward, ranging from gently bitter to very bitter, usually 4% to 7.5% ABV.
- Lager and pilsner: clean, crisp and light-bodied, typically 4% to 5.5% ABV.
- Stout and porter: dark, roasty, often with coffee or chocolate notes, 4% to 8% ABV.
- Wheat beer: soft, slightly tangy, often with banana or clove character from the yeast.
- Sour beer: tart or funky, sometimes fruited, varying widely in strength.
- Barley wine: strong, malty and warming, frequently above 8% ABV.
- Session ale: built for drinkability, usually under 4.5% ABV.
Modifiers added to a style name change the expectation in a predictable way. “Imperial” signals a stronger, more intense version of a style, often with higher ABV and bigger flavour. “Session” means the opposite: lower strength, built for drinking more than one. “Hazy” describes an unfiltered, often fruity and softer IPA style. “Bottle-conditioned” means the beer carbonated naturally in the bottle through a small secondary fermentation, which can leave a fine layer of sediment at the bottom.
Tasting descriptors are worth learning too. “Malty” points to bready or caramel sweetness, “roasty” to burnt coffee or dark chocolate notes, “citrusy” and “resinous” both describe hop character, and “funky” usually flags the wild yeast or bacteria behind a sour beer. Our British beer styles guide goes deeper into how these categories developed if you want a fuller picture.
Tasting vocabulary: how to talk about what you drink
A short vocabulary makes a big difference once you start describing beer rather than just drinking it. Aroma is what you smell before you sip. Palate covers the flavours you pick up on your tongue. Mouthfeel describes texture, whether a beer feels thin, creamy or syrupy. Body is closely related, referring to how light or full a beer feels in the mouth. Carbonation is the fizz level, and finish is what lingers after you swallow, whether that is dry, sweet or bitter.
A simple tasting order helps you notice more with every glass:
- Look at the colour and the head, the foam on top.
- Smell before you drink, picking out fruit, malt or hop notes.
- Sip slowly and let the beer sit on your tongue briefly.
- Describe what you noticed, even in one or two words.
Menu claims are easier to decode once you know the vocabulary behind them. “Dry” means little sweetness lingers at the finish. “Sweet” means residual sugar comes through. “Balanced” means no single element, malt, hop or yeast, dominates the others.
Pro Tip: Smell the beer twice, once straight after pouring and once after it has warmed slightly, since aroma often opens up as the beer loses its chill.
For a longer walkthrough, our step-by-step tasting guide builds on this same routine.
Containers and dispense: bottles, cans, kegs and casks
How a beer is packaged changes its texture as much as its ingredients do. Bottles and cans are sealed, pressurised containers suited to force-carbonated beer, and cans in particular block light, which helps prevent hop aroma from degrading. Kegs are large pressurised vessels connected to gas, usually CO2 or a nitrogen blend, that pushes the beer through the line and keeps it carbonated. A KeyKeg, or membrane keg, is a increasingly common one-way format that uses an internal bag so the beer never touches the gas directly.

Cask is different again. Cask-conditioned beer, often called real ale, undergoes a secondary fermentation inside the cask itself and is served without added gas pressure, using a hand pump or gravity instead, according to CAMRA’s guidance on containers. That gives cask beer a softer, more natural carbonation compared with the crisper, more pressurised feel of keg beer.
A few cask-specific words are worth knowing if you spend time around a UK bar:
- Spile: a small peg used to control the release of natural carbon dioxide from the cask.
- Shive: the wooden or plastic disc that seals the cask until it is tapped.
- Cask breather: a device that lets carbon dioxide in without letting oxygen in, which helps keep an opened cask fresh for longer.
- Finings: ingredients, traditionally isinglass, used to clear a beer of yeast and protein haze before it reaches the glass.
- Bright beer: cask beer that has been allowed to settle and clear naturally, ready to serve.
Our cask versus keg breakdown covers these differences in more practical detail if you want to taste the contrast for yourself.
Slang, naming and label cues worth spotting
Craft beer names are often half marketing, half flavour clue, and separating the two takes a little practice. A can called something playful rarely tells you about the beer inside, but certain words on the label almost always do. “Dry-hopped” and “unfiltered” describe something real about technique and texture, while a cheeky name on its own is just branding.
“Craft beer” itself has no single legal definition in the UK, and you will often see it used interchangeably with “independent beer” or “artisan beer” to signal a smaller-scale brewery rather than a global producer. That distinction usually says more about scale and ownership than about any specific flavour.
A short list of label cues worth trusting:
- Session: lower strength, built for drinking several over an evening.
- Imperial: stronger and more intense than the standard version of a style.
- Dry-hopped: added hops after the boil for aroma rather than bitterness.
- Unfiltered: left hazy on purpose, often fuller in body and flavour.
Reading a real menu at Lost And Found
Put these terms together and a taproom menu stops looking cryptic. “Stout, 5.8% ABV, Cask” signals something darker, roastier and softer on the palate, served the traditional way.
If you are still unsure, ask. Staff behind the bar are usually glad to pour a small taster before you commit to a full glass, and flights, a set of smaller measures across a few beers, are a good way to compare styles side by side. Try framing your question around the vocabulary above: “Something hoppy but low ABV” or “a dark beer on cask rather than keg” gets you a far more useful answer than “something nice”.
Our own line-up rotates constantly, drawing on independent breweries across the region, and the full current selection is always listed on our beer menu and the on-tap page. Our piece on Brighton’s independent breweries explains more about where that rotating selection comes from.
Why a little vocabulary changes how you enjoy beer
Most people assume craft beer knowledge takes years to build, but the honest truth is that a dozen words cover most of what you need. Learning ABV, IBU, colour and a few ingredient terms does not make you an expert, but it does make you faster at choosing something you will actually enjoy, and it gives you language for what you noticed rather than a vague “it was nice” or “not for me”.
The real shift happens once you start experimenting rather than memorising. Order the beer with the unfamiliar name, ask what dry-hopping does to this particular one, compare a cask and keg pour of similar strength side by side. Vocabulary only sticks when it is attached to a taste you remember, so the fastest route to confidence is simply trying more, ideally at a bar where someone can talk you through what is in the glass.
— Author
Visit us or browse the beer menu online
We keep our taps rotating with beer and cider from independent Sussex breweries, so the best way to put this vocabulary to use is to come and try a few side by side. Food and beer menus are often available online, allowing customers to check what’s pouring before arriving, with many pints sourced locally rather than from national distributors.

If you are planning something bigger than a casual pint, some taprooms offer venue hire covering both midweek and weekend bookings with exclusive use of the space and no hire fee, leaving you free to choose your own drinks, music and decorations.
- Browse the full range of Sussex beer, cider and bottle shop options.
- Look into venue hire for a party, tasting or private event.
FAQ
What are some funny names for craft beer?
Breweries often give beers playful or punny names that reference pop culture, local jokes or the hop varieties used, but the name itself rarely describes the flavour. Look past the name to the ABV, style and hop or malt notes listed alongside it for a real sense of what is in the glass.
What is another term for craft beer?
“Independent beer” and “artisan beer” are commonly used alongside “craft beer” to describe beer from smaller, independently owned breweries rather than large national producers. The terms overlap heavily and are generally used to signal brewery scale and ownership rather than a specific style or flavour.
What are some names of craft beers?
Craft beer names vary enormously between breweries and change constantly as new batches are released, so there is no fixed list to point to. The more useful approach is to check a current, rotating line-up such as our beer menu and read the style, ABV and hop notes for each one.
What are common slang terms for beer?
Common informal terms for beer in the UK include “pint”, “ale” and “lager” as general catch-alls, alongside style-specific slang like “hazy” for cloudy, unfiltered IPAs. Most slang describes either the serving format, such as a pint or a half, or a loose style category rather than a precise technical term.
Sources
- Gov
- Beer & Brewing dictionary: IBU and bitterness
- Analytical methods and colour measurement (PMC)
- Containers - CAMRA